Gauges
I installed a set of Prosport gauges. These have good features like alarms and peak and hold and are quite cheap. They are 270 degree stepper type and quality, while not brilliant, is ok. There is oil temperature, water temperature, oil pressure and fuel pressure.
I installed a set of Prosport gauges. These have good features like alarms and peak and hold and are quite cheap. They are 270 degree stepper type and quality, while not brilliant, is ok. There is oil temperature, water temperature, oil pressure and fuel pressure.
ProSport stepper motor gauges (note the computer was subsequently removed for the Autronic traction and boost control panel)
In order to locate the various sensors, I used a piece from UUC motorworks that replaces the oil filter housing cover and provides 1/8" NPT fittings for oil pressure and temperature. For the water temp I had tap into the t/stat area and the fuel sender sits in a brass manifold near the intake
In this shot you can see the oil temp / pressure sendors, the brass fuel pressure manifold on the right and the water temp sender at the top right
The wideband AFR TechEdge gauge and a VDO 30psi boost gauge are located on the left and right of the steering. The light switch was modified and moved to the right from the original left location.